Strong Algaecide
Strong Algaecide effectively inhibits algae and bacteria in swimming pools, ponds, impounding water reservoir, circulating cooling water, etc.
Fits different water environments, such as acidic water, alkaline water and hard water
Does not contain metal ions
No-toxic and no-irritant
Never causes foam
Never causes green hair
Strong Algaecide is compatible with those chemicals normally used to treat pools and is effective at both acid and alkaline pH. Strong Algaecide can be used in pools treated with chlorine chemicals and may reduce the amount of those chemicals normally required.
Product Parameter
|
Product Name |
Strong Algaecide |
|
Appearance |
Clear, colorless to pale yellow viscous liquid |
|
Solid Content (%) |
59-61 |
|
pH |
4.5-8.5 |
|
Viscosity (cPs) |
500-2500 |
|
Boiling Point |
> 100 ℃ |
|
Water Solubility |
Completely miscible |
|
Application |
Inhibits algae and bacteria in swimming pools, ponds, impounding water reservoir, circulating cooling water, etc. |
|
Package |
1, 5, 220 kg plastic drum, or customized |
Strong Algaecide Guidance for Swimming Pool
Strong Algaecide is a high-performance, non-toxic, and non-irritating product designed to effectively destroy existing algae and prevent regrowth in swimming pools. When used as directed, Strong Algaecide helps to maintain crystal-clear pool water without unpleasant side effects.
Important
To achieve optimal results, use Strong Algaecide under the following water conditions:
- pH level: 7.2 – 7.6
- Free chlorine: 1-3 ppm or Bromine level: 2.0 – 6.0 ppm
Note
- Wait at least 30 minutes after adding Strong Algaecide before swimming.
- Do not add Strong Algaecide within 24 hours of chlorinating the pool.
Directions for Use
* For freshly cleaned and filled pools
Test and adjust the pool pH to 7.2–7.6 using our pH Minus or pH Plus if needed.
In a plastic bucket half-filled with pool water, add 50-90 mL of Strong Algaecide per 10,000 L of pool water. Then stir gently to mix.
Slowly pour the diluted solution into the pool directly above the return inlet while the circulation system is running.
Keep the circulation system running for at least 30 minutes after adding the product.
After 24 hours, remove dead algae by brushing, vacuuming, and backwashing the filter as part of standard pool maintenance.
* For daily maintenance
Add 10-30 mL of Strong Algaecide per 10,000 L of the pool water every 5 - 7 days after the initial treatment and keep the pool circulation system running for at least 30min.
Storage Instructions
- Store in a cool, dry, and well-ventilated place, away from sunlight.
- Keep away from heat, sparks, or open flames.
- Always close the container tightly after use.
- Keep out of reach of children.
Safety and Precautions
- Use only in well-ventilated areas.
- Wash hands thoroughly after handling.
- Do not mix with other chemicals.
- Avoid contact with skin and eyes.
- Ensure the pool's filtration and circulation systems are functioning properly during use.
Maintain a sparkling clean pool all season long with our Strong Algaecide – your trusted solution for effective algae control.
Hot Tags: strong algaecide, China strong algaecide manufacturers, suppliers, factory, Aluminium Sulphate Coagulant, Calcium Chloride Drying Agent, flocculants, NADCC chlorine tablets, MCA flame retardant, spa Bromine Tablet
